This preamp is the closest thing to using no preamp at all, yet it provides sufficient gain to give music the drive and authority which no passive device can equal. Extraordinary resolution and immediacy from the shortest circuit path possible, implemented with our unique Direct Signal Path Technology.

Unparalleled transparency and excellent channel separation from our proprietary minimalist dual electronic volume control. Lightning-fast transient response and crystalline clarity from our perfectionist low-distortion amplification section using the 12AU7(ECC82) in cascode configuration. Perfectionist simplified and optimized circuitry allows the sound of the tubes themselves to emerge with unparalleled transparency―the meaning of the proverbial “straight wire with gain.”

－Specification－
Inputs: 4-Line Level Inputs (RCA). XLR input is for Input 4.
Input Impedance: 100kohms
Outputs: 1-Line Level Output (RCA). The option of a XLR output is possible(LSX4).
Gain: Selectable between 6dB and 12dB/Standerd, (12dB and 24dB/Option)
Tube Complement: 12AU7/ECC82 (2) for gain (tube-swapping possible), 6V4/EZ80 or 6CA4/EZ81 (1) for rectification.

In almost new condition, with original box, owner's manual and remote control. Retail price when new: $28,350

Click here for more info.

Click here for full review

ZL-200 FXB is an idealist, minimalist and non-compromise design with meticulous attention to detail in parts selection, layout, and construction.
-
We have achieved simplest possible circuitry with minimum number of components, with Four pairs of output MOS-FET’s per monoblock in BTL configuration with no overall NFB, achieving 180 watts @ 8 ohms.
-
It is a state-of-the-art power amplifier. Sonically pure and transparent.
Revealing, yet involving. Transcending the traditional boundaries of vacuum tube and solid state designs.

The FXB is the fully balanced version of the standard RCA-only FX2. Retail price is SGD 59,000 per pair.

"These monoblocks are the first solid-state amps I've heard that sound like a tubed unit," - Harry Pearson

Click here for more info.

The LP2 is a dual-mono vacuum tube phono preamplifier with two electrically and mechanically separated channels. It features a topology that brings out the most natural sound performance in the audio path, as well as graceful and sophisticated design.

The most advanced technical solutions have been employed in the design of the LP2. The preamplifier utilizes single-ended pure class A high current topology, with no loop feedback (a very accurate passive RIAA EQ network is used). Its unique circuitry utilizes specially selected very low noise high trans-conductance 417A / 5842 vacuum tubes. Two separate inputs for MM and MC cartridges, together with the corresponding selector/gain switches, allow to employ various types of cartridges without the tiresome switching of cables. Audibly neutral power supply features a full-wave VACUUM rectifier with a choke-containing filter (two chokes are employed), and one solid-state low-voltage analogue non-switching regulator used as the heater supply.

In the deluxe version, the power supply stores more energy, all film capacitors in signal path are bypassed by polystyrene capacitors of the highest available quality, and a custom-designed massive damping panel significantly reduces all types of mechanical vibrations which, in turn, leads to a more extended,1 coherent and natural bass reproduction.

In excellent physical condition and everything fully tested to work perfectly.

Click here for review.

Click here for more info.

The Bass Buster is a 4'-tall quarter-round tower with a radius of 8". Under its fabric cover, it's a Helmholtz resonator—a rigid enclosed column with holes drilled and spaced to tune the BB for absorption at a particular frequency. In this case, the center frequency is 90-95Hz, but by adding foam to damp air movement inside the column, the absorption can be spread out over a broader range, from approximately 65Hz to 225Hz.

12 pcs available. Choice of beige or grey.

Click here for review

Beige coloured 4′ x 12″ Double Buster diffuser panels. 4 pcs available.

Click here for review

The Golden Gate DAC project is the answer to the hugely popular expectation from our dear customers, that we install in the DAC the best parts known to the Audiophile community. So called BOUTIQUE parts.

Well, we give to every DAC, especially the Big7, the best parts that WE consider sanely priced. But of course the golden fish could bring something even more sexy. That’s how this project was born.

GG is the Big7 DSD DAC made of the MOST expensive boutique parts chosen by our customers in their wish-list survey.

Features included::

1.Silver WBT solder used throughout

2.All wiring is 26 GA stranded silver in teflon

3.WBT gold / silver RCA output sockets or Furutech Rhodium RCA

4.Furutech RCA digital S/PDIF input or WBT

5.ATOM Vishay first capacitor after the tube

6.Mundorf M-Lytic HV electrolytes in second stage of PSU .

7.Mundorf Foil MKP capacitors in third, final stage of power supply just before the tube anode.

8.Metal-Film laser cut resistor MLT in Anode Load

9.CMC Teflon sockets with gold pin contacts for all 3 tubes

10.Output capacitors are the huge Jupiter-Copper 1uF caps or Audyn True Copper 1 uF, bypassed by Duelund Pure Silver caps or by Mundorf Silver Oil Supreme. Yes, a hybrid, best of both worlds, supposedly beating even pure silver one-cap solution.

11.Rectifier tube is after market Takatsuki 274B

12.Music Tubes are Emission Labs mesh 45 Anniversary Edition.

13.Digital input SPDIF capacitor is Mundorf Silver Oil Supreme .

14.Chassis / box is made of pure copper stamped and powder clear-coated for 100 years of immaculate shine. Copper provides also heat dissipation and the best EM shielding possible.

In excellent condition. Fully balanced with R2R / PCM/DSD decoding capability.

Click here for more info.

Click here for full review

The Accurion i4 is a state-of-the-art active vibration isolation system. It is ideal for isolating high-resolution measurement equipment from building vibrations and other disturbances, while providing active compensation in all six degrees of freedom. The isolation effect starts at 0.6 Hz, achieving the max. performance of -40 dB at 10 Hz, where 99.0% of the vibration is isolated. In addition to the extremely short settling time, the lack of low frequency resonance proves a major advantage, whereas passive isolators amplify vibrations instead of isolating them.

Also excellent for isolating very sensitive high-end audio equipment like turntables or CD transports to achieve optional performance.

2 units available.

Click here for more info.

Symposium’s Ultra is the standard of comparison for equipment isolation platforms. The Ultra will take your system to a new level - with more dynamics, richer, more detailed and extended bass, more expansive soundstaging and a quieter background, all without the blurred transients and bass resonance problems of compromise solutions.

Please note, this item does not include any couplers. Sold as is.

Click here for more info.

Flagship Battery-Powered Digital Output Network Transport with 12TB HDD Storage, USB, Dual-AES/EBU, Coaxial, BNC and Optical Outputs, Word Clock Input.

Designed for use in the finest stereo systems, W20 offered a number of unique features which started a movement in Aurender's product design, and beyond.

W20's remarkable LiPO4 battery power supply delivers an utterly silent, black background. Its dual AES/EBU digital outputs and word clock input mean connectivity will never be a limiting factor with W20.

Click here for more info.

Click here for full review

At just over a quarter of the volume of the G1, G3 is the latest Vivid Audio loudspeaker in which the bass chamber resonances have been eliminated by the combination of ported enclosure with a precisely shaped tube. Again this exponentially tapered absorber sweeps over the top of the cabinet to give one of the most distinctive loudspeakers ever created.

The care taken with our driver design and the smoothly shaped external contours of the cabinet all help to give an intrinsically smooth response so when it comes to the crossover filter design it is simply a matter of division of the frequency bands rather than compensating for the shortcomings of the drivers which can so often be the case. Handmade and hard-wired, the crossover construction has been proved to offer superior sonic transparency when compared to the machine-made printed circuit-based commercial alternatives employed by most.

In pristine condition. Comes with magnetic grills, speaker jumpers and speaker spikes.

Click here for more info.

Click here for full review