Thanks to new materials like Carbon Fibre and Termoplastic Elastomer Eat was designing a new superflat table. The low profil base chassis is made out of highest density MDF. Because of its flatness this base sits perfectly stable on any surface! On this base the ultra low noise motor is mounted as well as 10 damping feets out of energy absorbing TPE (Termoplastic Elastomers = Hightech high energy absorbing damping material).

The tonearm itself is a completely new design which combines all advantages of a unipivot arm with a cardan design. The uni-pivot in the middle only helps bearing to be less loaded. The traditional Cardan bearing insures high stabilty and easy ness of use with very low friction. Also inside the tonearm is a special silicon-based grease to damp the tonearm / cartridge resonances by more then 50%

In near mint condition, and comes with original box, tonearm lead-out cable and custom-made dust cover.

Click here for more info.

Specifications

- Model No. - PS8JS
- Conductor - This Φ 0.26mm x 105 PC-Triple C
- Sectional Area - 5.575mm2 x 3
- Insulator - Audio Grade PVC + Black + Transparent Mesh
- Outer Dimensions - Φ 14.5mm
- Cable Length - 1.8m

In mint condition, with original box and papers.

Click here for more info.

The Limetree BRIDGE II is a high-class network adapter or audio renderer which can transfer music digitally in studio master quality from streaming providers and local storage media to existing D/A converters or other devices with digital inputs. This makes it possible to upgrade an existing hi-fi system with streaming for little money.

The Limetree BRIDGE II is simply connected with the network by means of a LAN cable or via WLAN. It has also a USB port for connecting hard disks or USB storage media. There is an optical and a coaxial digital output. A professional studio engineering sample rate converter makes sure that all streamed formats can be played back on an existing converter without major losses in sound quality.

In as new condition, with original box and all accessories.

Click here for more info.

Click here for full review

The Audio Note (UK) M3 Line Pre Amplifier has been specifically engineered for sonic performance rather than technical specification, and fulfils all Audio Note (UK) Level 3 criteria: -

*Pure Class A operation
*Zero negative feedback
*Single Ended circuit topology
*Valve rectification
*Materials and component quality

The M3 Phono Pre Amplifier features an ECC82 and 5687WB line stage, powered by a 6X5 valve rectified power supply based on the M10‟s Galahad PSU. This power supply also features an ECL82 for voltage regulation and a 5651 for voltage stabilizer. Audio Note (UK) Copper wiring, a mix of our standard and AN(UK) tantalum resistors in key areas, Audio Note (UK) copper foil signal capacitors and our custom electrolytic capacitors are used throughout the circuit, along with in-house designed and manufactured, custom Audio Note (UK) output transformers which feature I-E M4 cores and copper windings. Additionally, it features an exceptionally fine Moving Magnet phonostage which uses three GE 5670 valves, Audio Note (UK) copper foil signal capacitors and its own dedicated, valve regulated and rectified power supply.

In near mint condition. All tubes have been upgraded to higher quality vintage tubes.

Click here for more info.

Click here for full review

The MC275 vacuum tube amplifier is the most iconic amplifier McIntosh has ever made. Originally released in 1961, it became a favourite among audiophiles for its ability to drive power-hungry speakers with impressive power and low distortion levels.

Two-channel, tubed stereo (switchable to parallel mono operation) power amplifier. Tube complement: four KT88, three 12AX7A, four 12AT7. Inputs: 1 pair balanced (XLR), 1 pair single-ended (RCA). Output power: 75Wpc (18.8dBW) into 4, 8, or 16 ohms (stereo), 150W into (21.8dBW) 2, 4, or 8 ohms (mono).

This is an early generation reissue, in great condition. Fully functioning and no need for any repairs or service. 240V operation.

Click here for more info.

Listed as one of the 12 most significant speakers of all time (the absolute sound September 18th 2010) states that the Rogers LS3/5a offers a: “startling realistic vocal reproduction and a remarkably expansive and box-less sound picture”. The LS 3/5a has stood the test of time as few other speakers have. Ultimately the Rogers LS3/5a has transcended it’s BBC monitor status to become an audiophile legend in its own right.

A true iconic speaker and collector's item! In black ash finish. Current versions of this are selling at well over $4000!

Click here for more info.

Click here for full review

The McIntosh MC240 stereo amplifier is a classic from the golden years of tube audio, a top seller in its time and prized nowadays by collectors and audiophiles.

The MC240 has on one chassis two 40-watt power amplifiers. In addition to use as a stereo amplifier, the flexibility of the MC240 permits it to be used as a monophonic amplifier that delivers 80 watts, or as two separate 40 watt amplifiers with each channel amplifying completely separate programs, or as two amplifiers for use with an electronic crossover network.

Power output:
40 watts per channel into 8Ω (stereo), 80 watts into 2Ω (mono)
Speaker load impedance:
4Ω to 16Ω
Valve complement:
1 x 12AX7, 2 x 12AU7, 2 x 12BH7, 2 x 12AX7, 4 x 6L6GC

This is a vintage McIntosh tube power amplifier from the 60s era. It is a later version by the fact that the speaker terminal strips are located near the middle of the control panel, rather than the left side, as in earlier versions. All tubes are vintage with plenty of life left. In perfect working condition. Very rare in the local market and highly sought-after!

Click here for more info.

Click here for service manual.

Iconic McIntosh multi-channel power amplifier. Suitable for home theatre applications or to power active speakers with external crossover. Very musical and represents the true McIntosh sound!

FEATURES
*8-Channel Power Amplifier for multizone and home theater systems
*Single-cable connection to CR12 Multizone A/V Control Center
*8 x 40 watts (4 ohms) or 8 x 25 watts (8 ohms)
*Any pair can be bridged for 1 x 100 watts (4 ohms)
*Configurable to 7, 6, 5, or 4 channels
*Theater power configuration: (3 x 100W) + (2 x 40W) Wide powerbandwidth
*Ultra-low distortion
*Exclusive McIntosh Power Assurance System: Power Guard® clipping protection
*Sentry Monitor® current protection
*Thermal Cutout
*Turn-On Delay
*Soft Start inrush protection
*Low-noise toroid power transformer Remote power control
*Gold-plated high-current output terminals Fanless convection cooling
*Modular construction with steel chassis
*Glass front panel with illuminated nomenclature

Click here for more info.

Click here for owner's manual

Scansonic’s MK-5 is a compact two-way mini-monitor, featuring a sealed ribbon planar magnetic tweeter found in the brand’s Raidho-inspired M-series.

That tweeter’s membrane is formed by a Kapton-aluminium sandwich just 20µm thick. The bonus here is that it has an extremely low mass - approximately 50 times less than any conventional textile, ceramic, beryllium or diamond dome.

The tweeter is paired with a brand new 4.5-inch Kevlar coned mid/bass driver (hence the ‘K’ in ‘MK-5’) with underhung magnet system.

In pristine condition, with original box and manual.

Click here for more info.

The McIntosh C220 is an amalgamation of McIntosh’s many years expertise in tube design and newly developed control circuits. It has all the flexibility modern systems require while maintaining the highest quality two channel performance.

The C220 allows for electronic, independent adjustment level settings for each of the eight source inputs from either the front panel or remote control. Channel Balance is electronically adjusted and stored in memory.

In excellent condition, purchased from local agent. Comes with remote control.

Click here for more info.

Click here for owner's manual

Click here for full review